If you are having trouble protecting your MSD(moisture sensitive devices) from moisture, damages, you are on the right page. In this article, we will shed some lights on the importance of electronic dry cabinets.
Basically, a dry cabinet is an enclosure that can keep the electronic components from getting exposed to excessive moisture of the environment. People use these when they need to put their sensitive to moisture products with a low humidity rate in the environment.
We know that excess moisture can cause damage to specific products, such as PCB,IC,chips,optical products,precision instruments. Since moisture can have a negative impact on the performance of the device and cause a malfunction in some cases, it is important to keep them in a place where these problems do not occur.
Without further ado, let’s see why you may want to invest in a cabinet to meet your needs.
Importance of investing in a Dry Cabinet
Why professional manufacturers use a wardrobe to store their TMS? The answer is simple, they want the protection against fungi. As a matter of fact, fungus is the worst enemy of electronics manufacturing process. It is not easy to remove the fungi and it can also cause damage and large economic losses for the products.
The problem is that the fungi and the moisture can cause damage and cracks to the interior of the electronics and other moisture-sensitive materials. This can occur if you store the electronics and do not take steps to protect them from unwanted stuff, such as fungi and moisture. As soon as the fungus develops, you will not be able to prevent it from spreading quickly.
If you think that you can clean the fungus for printed circuit boards, you need to think again. The reason is that it can have a damaging effect on small components on printed circuit boards and too much work to be excessive, the cost of the work,therefore, we do not recommend that you go this route.
Often, the factories that have access to dry cabinets to finish storing their components that are exposed to workshops,Generally, the fungus tends to thrive in these areas because of the moisture. Usually, these people live in areas where the humidity remains high throughout the year.
Keep in mind that these can be an excellent choice for electronic and semiconductor manufacturers.Make sure that the equipment you have registered is free of dust and water vapor. And this can only be done if you invest in a good dry cupboards. These devices can be configured to control the humidity and prevent it from crossing the line.
If you want to store your MSD (moisture sensitive devices) in dry cabinets, make sure you choose an optimum moisture point,not to maintain the moisture level is too high or too low.
Sec modules is also very important,if the drying module has a short life span,then you need to replace it after two years or three years,it will be the cause of high cost and much time.
Often, it costs a considerable amount of money to get the fungus removed from your MSD. In addition to this, the treatment may not be 100% effective. As a result, you can end up with long downtimes.
Long story short, these are some of the reasons why you may want to invest in a good dry cabinet to store your expensive electronic equipment, such as cameras.